[nylug-talk] fsck chestnut

[Nadav Mavor]

its look like you HD is going to die son you can boot from cd (almost any
linux boot cd) and fsck the HD


On 10/17/06, matt black <linuxmania1 at hotmail.com> wrote:
>
> Classic question, how do you fsck a mounted partition. Googling found some
> really bad advice but not the basic solution to this problem:
>
> We have a single partition installation that dmesg has 100 lines of errors
> for (appended below)
> And here is the output of fsck -n:
>
>
> Block bitmap differences -551496 -551546
> Fix?
>
> Free blocks count wrong for group #16 (19402 counted=19400)
> Fix?
>
> Free blocks count wrong (4184669 counted=4171517)
> Fix?
>
> Free blocks count wrong  2304744 counted=2304483
> Fix?
>
> So the question is how to fix these errorson a single running partition.
>
> sincerely,
>
> Matt
>
>
> relevant parts of dmesg:
> [17179576.496000]     ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings:
> hda:DMA,
> hdb:pio
> [17179576.496000]     ide1: BM-DMA at 0x10a8-0x10af, BIOS settings:
> hdc:DMA,
> hdd:pio
> [17179576.496000] Probing IDE interface ide0...
> [17179576.784000] hda: ST320413A, ATA DISK drive
> [17179577.456000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [17179577.456000] Probing IDE interface ide1...
> [17179578.192000] hdc: LTN485S, ATAPI CD/DVD-ROM drive
> [17179578.528000] ide1 at 0x170-0x177,0x376 on irq 15
> [17179578.548000] hda: max request size: 128KiB
> [17179578.568000] hda: Host Protected Area detected.
> [17179578.568000]       current capacity is 39102336 sectors (20020 MB)
> [17179578.568000]       native  capacity is 39102337 sectors (20020 MB)
> [17179578.580000] hda: Host Protected Area disabled.
> [17179578.580000] hda: 39102337 sectors (20020 MB) w/512KiB Cache,
> CHS=38792/16/63, UDMA(66)
> [17179578.580000] hda: cache flushes not supported
> [17179578.580000]  hda: hda1 hda2 < hda5 >
> [17179578.648000] hdc: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)
> [17179578.648000] Uniform CD-ROM driver Revision: 3.20
> [17179578.852000] hda: dma_intr: status=0x51 { DriveReady SeekComplete
> Error
> }
> [17179578.852000] hda: dma_intr: error=0x10 { SectorIdNotFound },
> LBAsect=39102336, sector=39102336
> [17179578.852000] ide: failed opcode was: unknown
> [17179578.996000] hda: dma_intr: status=0x51 { DriveReady SeekComplete
> Error
> }
> [17179578.996000] hda: dma_intr: error=0x10 { SectorIdNotFound },
> LBAsect=39102336, sector=39102336
> [17179578.996000] ide: failed opcode was: unknown
> [17179579.136000] hda: dma_intr: status=0x51 { DriveReady SeekComplete
> Error
> }
> [17179579.136000] hda: dma_intr: error=0x10 { SectorIdNotFound },
> LBAsect=39102336, sector=39102336
> [17179579.136000] ide: failed opcode was: unknown
> [17179579.280000] hda: dma_intr: status=0x51 { DriveReady SeekComplete
> Error
> }
> [17179579.280000] hda: dma_intr: error=0x10 { SectorIdNotFound },
> LBAsect=39102336, sector=39102336
> [17179579.280000] ide: failed opcode was: unknown
> [17179579.280000] hda: DMA disabled
> [17179579.328000] ide0: reset: success
> [17179579.500000] hda: task_in_intr: status=0x59 { DriveReady SeekComplete
> DataRequest Error }
> [17179579.500000] hda: task_in_intr: error=0x10 { SectorIdNotFound },
> LBAsect=39167615, sector=39102336
> [17179579.500000] ide: failed opcode was: unknown
> [17179579.672000] hda: task_in_intr: status=0x59 { DriveReady SeekComplete
> DataRequest Error }
> [17179579.672000] hda: task_in_intr: error=0x10 { SectorIdNotFound },
> LBAsect=39167615, sector=39102336
> [17179579.672000] ide: failed opcode was: unknown
> [17179579.844000] hda: task_in_intr: status=0x59 { DriveReady SeekComplete
> DataRequest Error }
> [17179579.844000] hda: task_in_intr: error=0x10 { SectorIdNotFound },
> LBAsect=39167615, sector=39102336
> [17179579.844000] ide: failed opcode was: unknown
> [17179580.016000] hda: task_in_intr: status=0x59 { DriveReady SeekComplete
> DataRequest Error }
> [17179580.016000] hda: task_in_intr: error=0x10 { SectorIdNotFound },
> LBAsect=39167615, sector=39102336
> [17179580.016000] ide: failed opcode was: unknown
> [17179580.064000] ide0: reset: success
> [17179580.236000] hda: task_in_intr: status=0x59 { DriveReady SeekComplete
> DataRequest Error }
> [17179580.236000] hda: task_in_intr: error=0x10 { SectorIdNotFound },
> LBAsect=39167615, sector=39102336
> [17179580.236000] ide: failed opcode was: unknown
> [17179580.236000] end_request: I/O error, dev hda, sector 39102336
> [17179580.236000] Buffer I/O error on device hda, logical block 39102336
> [17179580.408000] hda: task_in_intr: status=0x59 { DriveReady SeekComplete
> DataRequest Error }
> [17179580.408000] hda: task_in_intr: error=0x10 { SectorIdNotFound },
> LBAsect=39167615, sector=39102336
> [17179580.408000] ide: failed opcode was: unknown
>
> _________________________________________________________________
> Stay in touch with old friends and meet new ones with Windows Live Spaces
>
> http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us
>
>
> _____________________________________________________________________________
> Hire expert Linux talent by posting jobs here :: http://jobs.nylug.org
> The nylug-talk mailing list is at nylug-talk at nylug.org
> The list archive is at http://nylug.org/pipermail/nylug-talk
> To subscribe or unsubscribe: http://nylug.org/mailman/listinfo/nylug-talk
>