[nylug-talk] I need to buy about 30 pcmcia modem cards

[alex@pilosoft.com]

On Mon, 3 Jul 2006, Ezra Taylor wrote:

> I have about 15 moxa devices and the pcmcia card I have is not
> recongized by the moxa.  The moxa is running linux 2.4.19 I think.
> Minicom is being used to test and dial out to a analog phone(testing
> only).  Next, once I launch minicom, I'm not able to execute any AT
> commands using the pcmcia card.  I don't remember the type of pcmcia
> card I was given to do the test.  I just remember it dosen't work. Also,
> I attached an external modem(U.S. Robotics) modem with success. I can
> type AT commands after launching minicom when using the external modem.  
> Have any of you experience this?  Are there any special key strokes.  
> Have any of you been able to execute AT commands using a pcmcia modems
> with minicom.
Hi,

Can you possibly give us any less technical information about what you
have tried to do, so our mind-reading abilities would be fully 
challenged?

It is not enough to omit the brand of the card, or whether the card was
detected by pcmcia core, or whether the USB device node was created, or
the dmesg after inserting. Even mentioning that your host device was moxa
and it was running 2.4.19 was way too much information!

--
Alex Pilosov    | DSL, Colocation, Hosting Services
President       | alex at pilosoft.com    877-PILOSOFT x601
Pilosoft, Inc.  | http://www.pilosoft.com