[nylug-talk] I need to buy about 30 pcmcia modem cards

[Ezra Taylor]

I have about 15 moxa devices and the pcmcia card I have is not
recongized by the moxa.    The moxa is running linux 2.4.19 I think.
Minicom is being used to test and dial out to a analog phone(testing
only).  Next, once I launch minicom, I'm not able to execute any AT
commands using the pcmcia card.  I don't remember the type of pcmcia
card I was given to do the test.  I just remember it dosen't work.
Also, I attached an external modem(U.S. Robotics) modem with success.
I can type AT commands after launching minicom when using the external
modem.  Have any of you experience this?  Are there any special key
strokes.  Have any of you been able to execute AT commands using a
pcmcia modems with minicom.


Thank You
Ezra Taylor

On 7/3/06, alex at pilosoft.com <alex at pilosoft.com> wrote:
> On Mon, 3 Jul 2006, Ezra Taylor wrote:
>
> > Hello all:
> >               Do you guys know where I can buy about 30 pcmcia modem
> > cards that work with linux?
> fleabay
>
> i don't think there are any pcmcia cards that *don't* work with linux - by
> nature, they are all 'hardware modem' not softmodem, and present itself as
> a serial port.
>
> -alex
>
> _____________________________________________________________________________
> Hire expert Linux talent by posting jobs here :: http://jobs.nylug.org
> The nylug-talk mailing list is at nylug-talk at nylug.org
> The list archive is at http://nylug.org/pipermail/nylug-talk
> To subscribe or unsubscribe: http://nylug.org/mailman/listinfo/nylug-talk
>


-- 
Ezra Taylor